Fencing in Fulbourn

About Fulbourn

Fulbourn has the chalk Gog Magog Hills to its south and southwest and flat, drained fen to the north and east, and is close to the Fulbourn Nature Reserve and Fleam Dyke.

Fencing in Fulbourn

Properties backing onto fields or open ground are particularly vulnerable to panels that shift and sag when a fence has not been correctly fixed. We work in Fulbourn and understand what the site conditions here call for in terms of post depth, concrete fixing, and panel choice.

Why Good Fencing Matters

A correctly built fence gives privacy, security, and a clearly defined garden that you can use without compromise. It also holds its value as part of the property. A fence built to last - with posts set at the right depth, concrete collars properly cured, and pressure-treated timber used throughout - will give years of service before any maintenance is needed. A fence built quickly with undersized posts or no gravel board will start to fail within a couple of years and cost more to repair or replace than the original saving was worth.

Chalk is relatively easy to work but does not grip a post as firmly as heavier clay. Knowing how to mix and set concrete in this kind of ground is what produces a stable result.

Close-Board and Feather Edge Fencing

Individual feather edge boards, each slightly overlapping the last, are fixed vertically to treated arris rails. The result is a solid fence that has enough flex to cope with minor post movement without boards splitting or panels cracking. A gravel board along the base - concrete or treated timber - keeps the bottom of the fence clear of damp ground and prevents rot working up from the soil line.

Installed close-board fencing with concrete posts and a gravel board in the Fulbourn area typically costs in the region of £120-£180 per linear metre, with the final price depending on ground conditions, slope, and any site-specific groundwork. That figure covers a standard 1.8 metre privacy fence.

Wooden Fence Panels

Lap panels are widely available and cost less upfront, but the horizontal overlap design traps moisture and the thinner timber is prone to warping, especially on south-facing boundaries that get a lot of sun. For a main garden boundary, particularly on an exposed plot, feather edge or tongue-and-groove board construction is a more practical choice. Lap panels have a place on sheltered side boundaries or internal divisions where cost is the priority and longevity less critical.

Picket Fencing

A low picket fence - typically 0.9 to 1.2 metres - gives a clear front boundary without the closed-off look of a solid panel. We fit standard pointed pale designs and can also cut custom profiles where a property has an existing picket style to match. Painted white or left to weather, a properly built picket fence suits a period property well and is straightforward to maintain.

Post and Rail Fencing

Where Fulbourn properties border open land or paddocks, post-and-rail fencing is a practical and cost-effective boundary solution. Two or three treated rails mortised or nailed to round or square posts mark the boundary clearly without the cost of a full close-board run. Post and rail is also appropriate as a front boundary on rural-character plots where a solid fence would look out of place. For longer rural boundary runs, it is the standard choice.

Stock Fencing

For paddocks and larger rural plots, stock fencing - wire mesh strained between timber posts - provides containment for horses, cattle, and smaller livestock at a fraction of the cost of close-board over a long run. The mesh pattern should suit the animals being kept. For horses, a tightly strained wire mesh with no barbed wire is the standard recommendation. We supply and fit appropriate stock fencing specifications for residential paddocks and working farms in the area.

Driveway Gates

A driveway gate adds security and a defined entrance to a property. The gate posts carry significant repeated load, particularly on a double gate, and need to be set with larger concrete collars and to greater depth than a standard fence post. Using undersized posts or insufficient concrete is the most common cause of gates that begin to drop and bind within a few years. We size posts and fixing to suit the gate weight and width before ordering materials.

Timber gates are available in a range of styles from plain ledged and braced designs to more decorative framed and panelled gates. For period properties in Fulbourn's older core, a traditionally proportioned gate in hardwood or treated softwood looks well. For newer houses, a more contemporary close-board or open-framed design is usually the better fit.

Acoustic Fencing

Acoustic fencing uses denser construction - tongue-and-groove boards rather than feather edge, combined with a concrete or composite base that seals the bottom gap - to reduce the amount of sound passing through. A well-specified acoustic fence can make a noticeable difference to ambient noise levels in a garden. It performs best when the whole run is sealed, with no gaps at posts or ground level.

Fence Repairs

Post rot below ground level is the most common repair job on older timber fencing. The post fails at the point where the treatment ends and untreated timber sits in damp soil, while the panels above can still be perfectly usable. A steel repair spike driven over the old stump and fitted with a new post section is a cost-effective repair in this situation. We assess each post in a run before recommending whether to repair or replace, which saves money where the existing panels are in good condition.

Broken arris rails and loose boards after wind damage are also common calls. Where the posts are still plumb and solid, a rail repair and board re-fix is a short job that restores the fence to full condition without a full replacement.

Bespoke Fencing

Irregular plot shapes, sloping gardens, and specific design briefs all call for something built to measure. We can construct stepped or continuously raked panels to follow a slope, match profiles to existing fencing on a shared boundary, and build runs that turn corners at unusual angles. If your garden does not fit a standard panel, that is not a problem - describe what you need and we will give you a practical answer on what is achievable.

Areas We Cover Near Fulbourn

From our base in Haverhill we cover Fulbourn and the wider area, including Kedington, Wickhambrook, Steeple Bumpstead, Sturmer, Poslingford, Stoke by Clare, Withersfield, West Wratting, Thurlow, Stambourne, and Ridgewell. If your property lies between these places, call and we will confirm whether we can reach you.

Get a Quote for Fencing in Fulbourn

Call us to arrange a site visit in Fulbourn. We will measure the boundary, assess the ground, talk through the right approach for your property, and give you a clear price for the work before anything is agreed.